Our Stainless Steel Offerings include the following:

Calibrated Steel

• Sectional cold-drawn steel with round & hexagon section with diameter of 10 to 50 mm of stainless, heat-resistant, ball bearing, alloyed, structural steels.
• Steel with specially treated surfaces (“silver” steel), with diameter of 10 to 50 mm of stainless and heat-resistant alloys and high-speed, tool, ball-bearing, alloyed and structural steels.

Sectional Rolled Metal:

• Sectional rolled metal of stainless, high-speed, heat resisting, alloyed, structural and electric (APMKO) steels having round, square and hexagon section  with diameter of 6.5 to 65 mm. which maybe delivered both in bundles (round and hexagon with 6.5 to 24 mm diameter), and in rods (diameter of 12 to 65 mm).

Wire:

• Wire of stainless steel, ball-bearing and alloyed steels with diameter of 1.5 to 9.2 mm in bundles having weight up to 50 kg.
• Welding wire of alloyed and stainless steels with diameter of 1.5 to 6.0 mm in bundles having weight up to 50kg.
• Ground and polished rods of stainless, high-speed, tool, structural and alloyed steel with diameter of 1.0 to 5.5 mm.

Cold-drawn steel:

• Cold-drawn steel with round and hexagon section of stainless, alloyed, and structural steels with diameter of 3.0 to 3.9 mm in bundles and diameter of 4.0 to 9.5 mm in rods.

Rolled Sheet/Plate Steel:

• Cold-rolled sheets with thickness of 0.8 to 3.0 mm of stainless, high-speed, tool and alloyed steels, (width of the finished sheet is 740 to 1,000 mm and length is 1,450 to 2,000 mm).
• Hot-rolled sheets with thickness of 2.0 to 30 mm of the same range of steel marks as for the cold-rolled sheets.
• Hot-rolled steels in rolls with thickness of 2.0 to 4.0 mm (width is 380 to 420 mm and inner diameter of the coil is 500 mm)

Rolled Strip

• Cold Rolled Strip of Stainless steel and heat resistant alloys (thickness is 0.05 to 2.0 mm and width is 9.0 to 400 mm)